Dana
I have a couple corms that are just starting to sprout little roots. I see people starting them in stratum and perlite. Is that the best way to start? Whatās next and when?
Tillbaka till Anything about plants šŗšø
I have a couple corms that are just starting to sprout little roots.ā¦ | Anything about plants šŗšø | Planta-community
21 kommentarer
- Kayla
That is the way I start and it hasnāt failed me yet! I use 50/50 stratum perlite mix. I use a 2oz to go cup in a 3oz cup. Put in a wick for a Jerry rigged self watering setup. Then I cover it with a lid or another 3oz cup. In the beginning, I start with no holes for 100% humidity and over time I add holes to acclimate back to normal humidity as the plant starts to grow. If you donāt have a soldering iron, you should get a cheap one on amazon to help you make these holes. If itās a brand new corm, I lay on top of the soil and peel off the outer brown shell. If itās more mature and starting to peak out, I just nuzzle it into the substrate a little bit. I used to completely bury the corm but now I leave exposed because it seems to do better. I hope this helps! š«¶š¼šŖ“
2 gillningar
- Dana
Very helpful. Where do you get your cups? Is there a brand of stratum you like? I need to get everything from Amazon cause I have a gift card for Motherās Day. My kids wanted to make sure I got plant stuff. I see you have a little green house. Do you have recommendations? And do you put a grow light on it and the humidifier gage?
0 gillningar - Kayla
Amazon has it all! I get the 2oz ones from when we order out but you can buy those too obviously. Fluval stratum. I use this display case for figurines as a greenhouse. I had to use my soldering iron to melt holes to get the grow lights in there with the ones Iām using. I like barina or sansi grow lights. Lots of options of the type depending on your setup. I also have a heat mat under both of the mini greenhouses with a hygrometer inside. You do want to open it up to let them have fresh air once in a while. Added pics of everything I used for this (except the perlite - I think I have miracle grow brand but anything would work). And another pic of the complete setup. Happy to answer any more questions or help out! I love plants and love helping others grow them too!
0 gillningar
- Kayla0 gillningar
- Kayla0 gillningar
- Kayla
The barina strips are held up with magnets. And I used sansi pucks and just laid them on top lol If you want to talk more. Feel free to reply or I can even give you my # if itās easier š
0 gillningar
- Dana
Do you use the same process for propagations that are rooted? Iāve got a Brazil and I think a neon pathos that have great roots and seem ready for the next step. Would you suggest stratum/pearlite and the āgreen houseā until their roots are strong? Or do you just do this process with corms?
0 gillningar - Kayla
For really small plants or infant props with roots, I leave in here as long as I can until they donāt fit or I need more room. Mostly bc they grow faster than if I took them out. You absolutely can still grow props outside of a greenhouse setup. Just noticed it goes way faster in one. For things like pothos and syngonium that I prop, I use big clear bins with lids. With a grow light, heating pad and computer fan to give some air circulation. No matter what, I always would use stratum/perlite for corms or props. I used to use stratum only but it tends to disintegrate way faster and it gets sludgy. I will start with water for pothos and syngonium cuttings. With pothos nodes only, Iāll throw them in stratum/perlite. Didnāt have good luck with Sphagnum moss. And you can also use the puddle method with corms. Just tried it for the first time. Once I got some roots, I put them in the stratum/perlite setup.
1 gilla- Dana
I ordered the little display case, the humidifier reader, heat mat, stratum and grow lights for the case. I need to get the little cups and rope. Got one of my dream plants today. Rattlesnake plant!!
1 gilla
- Dana
Question about the computer fan. Did you have to drill holes to get it in there? How does it handle the humidity?
1 gilla - Kayla
If you have a sweatshirt with a drawstring you donāt use or a shoelace, that works too! I try to find anything around the house that I can make work. For instance, to go cups from Starbucks or any fast food are great to have a mini individual greenhouse lol. I love the way rattlesnakes look but I killed my first calathea and have a little PTSD from it š. I was a beginner when I got one so Iām sure i wouldnāt kill it now. They are just finicky
1 gilla - Kayla
So for the fan, I used double sided tape in my bin. I donāt have one in the display case. It does get rusty bc i do mist inside the bin or case. Everyone i follow on youtube tends to use them. I think if I didnāt mist it wouldnāt be so beat up. Otherwise it does the job!
0 gillningar - Dana
How do you plug it in when itās inside the case? Did you drill a hole for the cord? I also have my grow lights laying on top of the case. Will it get too hot?
0 gillningar - 1 nytt svar i appen
- Kayla
For my bin, I could put the cord over the side and the lid would close. For the display case, I used my soldering iron to make a hold for the lights to be inside. You can seal the hole back with some of the water strip seal (I didnāt do it bc I was lazy). You could also drill a hole but itās gonna be a few drills to get that cord end through it. I did 2 holes on 1 case and 1 hole on the other and pulled the cords through all of them so just 1 long string through both cases with both lights. And I also have my pucks on top of the case and it hasnāt got too hot yet. It gets warm. Prob should read directions to make sure itās šÆ safe lol.
1 gilla- Dana
I felt the top of the case and itās not hot at all. Thereās no precipitation inside. Iāve got a small prop container next to it that fits on the heat mat and itās totally humid. Iāll send a picture later. Just got home from work.
1 gilla - Dana
Hereās my set up. Iām pretty happy with it.
1 gilla
- Kayla
It looks amazing! I love it. Please keep me updated on how they do!!! š¤©ā¤ļø
0 gillningar - Dana
I just got back from visiting my dad in CA for a week and all my corms are sprouting! The ones I put in the little shot glasses actually have leaves starting! So excited!
1 gilla - Kayla
Ahhhh thatās awesome. And the nice thing about having them in the case is that you can go away for a week and because of the humidity, they donāt usually use up all their water. I need to see pics!! Iām so excited for you š
0 gillningar - 1 nytt svar i appen
