How to water your lawn
For established lawns, water when the top 2 to 3 inches (5 - 7.5 cm) of soil are dry, and water deeply enough to moisten the soil at least 4 to 6 inches (10 - 15 cm) down.
If the soil is still moist right now, snooze this action, and we will remind you again in 2 days.
There are a few different ways to water your lawn depending on its size and setup. Whichever method you choose, aim to water early in the morning (ideally before 10 AM) so water soaks into the roots before the sun evaporates it, and the grass blades have plenty of time to dry before nightfall.
Sprinklers (oscillating, rotating, or stationary)

Position the sprinkler so its spray pattern covers the lawn evenly without wasting water on driveways, patios, or sidewalks.
Place a couple of empty, straight-sided containers (like clean tuna cans or a rain gauge) in the watering zone to measure how much water your lawn actually gets.
Turn on the sprinkler and let it run until the containers collect about 0.5 to 1 inch (1.25 - 2.5 cm) of water.
Move the sprinkler to the next section and repeat until the entire lawn has been watered.
Deep, infrequent watering encourages grass roots to grow deep into the soil, making your lawn more drought-resistant than light, daily sprinkling.
In-ground irrigation systems
Check your sprinkler heads briefly when the system turns on to make sure none are clogged, tilted, or spraying onto paved surfaces.
Set your timer for early morning hours when wind is calm and evaporation is lowest.
Run each zone long enough to deliver roughly 1 to 1.5 inches (2.5 - 4 cm) of water per week in total (including rainfall), depending on your grass type and the weather.
If you notice water pooling or running off, especially on slopes or heavy clay soil, use the cycle-and-soak method: split the watering time into two shorter runs spaced 30 to 60 minutes apart so the soil has time to absorb the moisture.
Rain sensors help prevent overwatering after a rainy week. Pause scheduled watering after heavy rainfall.
Hand watering (hose with a spray nozzle)
Attach a gentle shower or fan nozzle to your garden hose to avoid blasting away soil or flattening grass blades.
Move slowly across small lawn areas, dry patches, or newly planted spots, keeping the water flowing steadily over one section until the soil begins to soak it in.
Pause for a few minutes if water starts to puddle on the surface, then do a second pass to ensure moisture reaches deeper down into the root zone.
Hand watering works best for small yards, tight corners, or spot-treating sunny patches that dry out faster than the rest of the lawn.
Adjusting for different types of lawns
Not every lawn needs the exact same watering routine. If you know what kind of grass is in your yard, we recommend switching your plant in Planta to that specific grass type, and making sure the plant stage is set accurately so the app can tailor the care.
If you aren't sure of the exact species, adjust your routine based on the general type of lawn you have:
Cool-season grasses (e.g., Kentucky bluegrass, fescue, perennial ryegrass): These grasses thrive in mild weather and need consistent moisture during hot summer stretches, typically around 1 to 1.5 inches (2.5 - 3.8 cm) of water per week, to stay green and avoid going into summer dormancy.
Warm-season grasses (e.g., Bermuda, zoysia, St. Augustine, buffalo grass): Naturally built for heat, warm-season lawns have deep roots and higher drought tolerance. Most thrive on 0.75 to 1 inch (2 - 2.5 cm) of water per week once established.
Newly seeded lawns & fresh sod: Unlike established turf, new grass seeds and unrooted sod don't have deep roots yet. Instead of deep, infrequent soakings, water lightly and frequently to keep the top 1 inch (2.5 cm) of soil consistently damp (never soggy or flooded). Once the roots anchor into the soil, gradually transition to deeper, less frequent watering.
Avoid watering late in the evening or overnight. Wet grass sitting in the dark creates the ideal environment for certain lawn diseases.
