The Best Way to Water Your Bromeliad Plants

The Best Way to Water Your Bromeliad Plants

Want to learn more about Watering bromeliaceae (bromeliad)

Get individual care schedule and reminders for your plant with our app Planta. Never kill a plant again!

Planta on the app storePlanta on google play

How to water

Feel the soil: the top layer (about 1 inch) should be dry before giving your Bromeliad plant more water. You should also check the rosette/center of the plant, it should always have at least a little water in it. There are several ways to water a Bromeliad - they aren’t very picky. Choose a way that suits you the best.

If the soil is wet - snooze this action, we will remind you again in 2 days.

Bromeliad watering 1

Water over the soil

  1. Pour water over the soil, using, for example, a watering can or put the plant directly under a tap

  2. Continue adding water to the pot until it starts to run out from the drainage holes

  3. Make sure to also water the center of the plant/rosette

  4. If you have a tray under the pot when watering, make sure you remove all the collected water afterwards - never let your plant sit in water

  5. If you watered under a tap make sure that water has stopped running out from the bottom before putting it back

Bromeliads love to have water in the center of the plant/rosette, so always make sure to fill it up when watering your plant. — Planta tip

Bromeliad watering 2

Bottom watering

  1. Fill the plant tray with water

  2. Make sure the soil is in contact with the water on the tray

  3. Water the center of the plant/rosette with a watering can

  4. Wait for about 10 minutes

  5. Feel the soil to see if it absorbed enough water —> if the soil is moist throughout, remove any excess water from the tray

  6. If it’s still dry —> add more water to the tray

  7. Wait 20 more minutes before removing the excess

Note

Bottom watering will not wash away salts and other minerals from the soil, so make sure to also give water over the soil every now and then.

Water bath

  1. Fill a bucket or any other vessel with lukewarm water

  2. Lower the whole pot down in the water, stop where the stem of the plant starts. Make sure all of the soil is under water

  3. The water will now start to bubble - wait until it stopped

  4. Lift the pot up and let the excess drain off

  5. Put your Bromeliad back in the cachepot or on the tray

  6. Water the center of the plant/rosette

  7. After 1 hour, check that your plant isn’t standing in water, if it is it might get overwatered and rot

Bromeliad plants are somewhat drought-tolerant, so you don’t need to stress about them drying up a bit. — Planta tip