---
title: "Any suggestions on how to put drainage in this pot"
description: "Any suggestions on how to put drainage in this pot"
url: "https://getplanta.com/community/lZ7uAE3pQ86jnFGxrCwLrg/5NMEATEDTRWcNOwFe9f2Jg?language=da"
community: "Anything about plants"
author: "盛开"
published: "2024-09-20T22:31:59.227823Z"
language: "en"
image: "https://images.getplanta.com/v1/resize/7nsE0HTuBEUtydi_G7yysYzO1uuqrfqsYCIT4mmWluk/iYMcF37XQJapb2sbbw3yqw.webp?size=large"
---

[Fællesskab](https://getplanta.com/community.md?language=da) / [Anything about plants](https://getplanta.com/community/lZ7uAE3pQ86jnFGxrCwLrg.md?language=da)

# Any suggestions on how to put drainage in this pot

_Opslået af 盛开 den 2024-09-20_

Any suggestions on how to put drainage in this pot

![Vedhæftet fil 1 af 1](https://images.getplanta.com/v1/resize/7nsE0HTuBEUtydi_G7yysYzO1uuqrfqsYCIT4mmWluk/iYMcF37XQJapb2sbbw3yqw.webp?size=large)

## 14 kommentarer

### Liam kommenterede den 2024-09-20

Is it ceramic?

### 盛开 kommenterede den 2024-09-20

I think so

#### Liam svarede den 2024-09-20

However you choose to do it, do it very very carefully and slowly. I’d honestly recommend not using this as a drained pot if you want to make sure it stays intact. Ceramic pieces break very easily so trying to put holes in it is going to be tricky because you’re putting enough pressure to make a hole, but trying to not put enough to make it break, and that’s a thin line. I’m trying to think of ways you could do it but every way I’m thinking of would just be too risky, but maybe someone here will have an idea that would work 🥹🫂

### 盛开 kommenterede den 2024-09-20

I there another way you suggest to put drainage in it

### Kades kommenterede den 2024-09-20

It depends on if the pot is glazed or not. If it’s glazed you can use a tile drill bit. Masonry bit for unglazed

#### Kades svarede den 2024-09-20

You’ll really want to start slow and gently so you don’t crack the pot. You could try wet drilling or adding masking tape over where you’re going to drill

### 盛开 kommenterede den 2024-09-20

I believe it has glaze on it because it’s shiny in the inside so I think the mat look on the outside is just an over coat is that still okay

### 盛开 kommenterede den 2024-09-20

And it is pretty small

#### Kades svarede den 2024-09-20

What kind of plant are you putting in it?

### 盛开 kommenterede den 2024-09-20

I was planning on putting my Dieffenbachia  
Maculata in it

#### Kades svarede den 2024-09-20

I might try to find something a bit bigger for the diffenbachia. They grow pretty quickly. Depending on how small the pot is it could be alright for a succulent as long as you are really vigilant about checking the soil before watering.

### 盛开 kommenterede den 2024-09-20

Well thank you for all of the advice I decided to drill a hole in it and luckily it worked here’s a picture

![Vedhæftet fil 1 af 1](https://images.getplanta.com/v1/resize/7nsE0HTuBEUtydi_G7yysYzO1uuqrfqsYCIT4mmWluk/4soCSCgsREC2-9Tc74EUbA.webp?size=large)

### Deanna kommenterede den 2024-09-21

You got really lucky. For the future, use a diamond drill bit. Start super slow at a 45 degree angle and use water to keep it from getting too hot. It’s slow, but it the correct way to do it.

### 盛开 kommenterede den 2024-09-21

Thank I did watch a video on it before and they said the same thing so I used that. Thank you tho

---

_Planta-fællesskabet (https://getplanta.com). Alle kan læse med. For at slå op, kommentere og like, hent Planta-appen: https://getplanta.com/download_